Test Tube Rack
December 19, 2024
Heavy Duty Storage Racks
December 19, 2024
Water Baths
Water Bath (Double Walled) provides constant temperature to solutions and samples for incubation purpose, chemical reactions or otherwise. Infralab manufactures Water Bath Model IHE12 in India and supplies it to pharmaceutical organizations, waste treatment plants, research centers, agricultural laboratories, clinical laboratories, hospitals and universities. Water Bath is available on GEM – the government e-market place.
Body Specifications:
- Fabrication: Double Wall Fabrication
- Inner Chamber Material : Stainless Steel
- Exterior Wall: Mild Steel Sheet duly powder coated
- Filling: Gaps are filled with high grade glass wool
- Concentric Rings: Remove them to place containers of varied sizes
- Heating Element: Immersion Type fitted at the bottom of the chamber
- Temperature Range: From ambient to 100°C controlled by hydraulic type capillary thermostat.
- Control Panel: Regulator Knob and Indicators
- Power Supply: 220V A.C. 50 Hz Single Phase
Size inside (Stainless Steel)
Capacity (approx.)
a) 300x250x100mm 6 holes of 75mm dia . 8ltrs.
b) 355x405x100mm 12 holes of 75mm dia. 15 ltrs.
Related products
-
Refrigerated Centrifuge (FSSAI)
– Bench Type
– 16000 RPM – Ultra Speed – Self balancing Motor
– Kirloskar Compressor
– Noise Free & Vibration Free
CRC Sheet duly Powder CoatedStainless Steel Centrifugal Bowl
LCD Display
Digital Timer
Lock & Dynamic BrakeImbalance Detector
Acceleration & Deceleration ModesMicroprocessor Based
Speed Regulator
Digital Temperature Controller & Indicator
Complete with Chord & Plug
Max. Speed : 20000 RPM
Max. RCF : 27800xg
Timer : 0-99 min
Motor : Brushless Motor
Temp. Range: Room temperature- to Minus 8°C
Temp. Accuracy : ±2°C
Power : AC 220V 50 Hz 20A
Weight : 60 kg. approx.Dimension : L-27″ x W-21″ x H-15″ approx.
-
Bio Safety Cabinet
Technical Specifications:
⚫ Cleanliness: Class 100
⚫ Control: Digital
⚫ Particle retention: 0.3 micron
Velocity:90FPM + 20%
Illumination :750-800 lumen
Noise level: 60-65 decibels
⚫ Standard : FED 209E
⚫ Power supply: 220v single phase
Nominal inflow velocity of 105 fpm (0.5 m/sec)
Nominal down flow velocity of 55 fpm (0.3 m/sec)
Approximately 70% air recirculation
Smart-Start System
Night-Smart System that idles the blower when the sash is fully closed Digital display of inflow air velocity
Fluorescent light or UV light control
Control on right-hand side post for manual activation of blower, light 304 grade stainless steel seamless interior
Epoxy-coated mild steel exterior
99.99% efficient HEPA filters
Fully-closing, clear 1/4″ Acrylic sash with two sash handles, Sash
counterbalanced, anti-racking mechanism and 10 degree slope
21.7″ (54 cm) maximum sash opening height and 27.0″ (69 cm) viewing height
Glare-free fluorescent lighting
10′ (3 m) power cord with plug -
Laboratory Drying Oven
Laboratory Drying Oven is an industrial type Hot Air Oven, which is used to heat as well as zero down the moisture from the surface and the process carried out inside the equipment. Infralab manufactures Industrial Drying Oven (Model IHE02) in India and supplies these to clinical laboratories, research laboratories, pharmaceutical laboratories, and universities. Drying Oven Industrial Type is available on GEM – the government e-marketplace.
- Body Specifications:
- Fabrication: Double Wall Fabrication
- Inner Chamber Material: Mild Steel Sheet duly powder coated
- Exterior Wall: Mild Steel Sheet duly powder coated
- Filling: Gaps are filled with high-grade glass wool
- Air Circulation: Air Blowers are integrated into the equipment for a constant flow of hot air in order to maintain the uniform temperature inside the chamber,
- Heating Elements: Nichrome Wire Heating Element on three sides of equipment for uniform heating – Heating Range: 50°C to 250°C ± 2°C controlled by hydraulic type capillary thermostat.
- Thermometer: Dial-Type Thermometer – Control Panel: Regulator Knob and Indicators – Power Supply: 220V A.C. 50 Hz Single Phase.
- Chamber size in mms/inches
- a) 900 x 600 x 600 mm (36″ x 24″ x 24″ )
- b) 1200 x 900 x 900 mm (48″ x 36″ x 36″)
- c) 1500 x 900 x 900 mm (60″ x 36″ x 36″)
- d) 1800 x 1200 x 900 mm (72″ x 48″ x 36″)
