Electronics Lab Equipment Archives

B.O.D. Incubators

Inner Chambers (W X D X H) mm Capacity cu.ft. Capacity (Litre)
455 x 410 x 610mm 4 cu.ft. 112 L
505 x 415 x 830 mm 6.1 cu.ft. 171 Ltrs
565 x 565 x 865 mm 10 cu.ft. 280 Ltrs
650 x 580 x 900 mm 12 cu.ft. 336 Ltrs
700 x 650 x 900 mm 15 cu.ft.
Fabrication:
Inner Chamber Material:
Exterior Wall:
Shelves:
Cooling Unit:
Heating Unit:
Temperature Range: Air Circulation: Locking System: Inspection:
Double Wall Fabrication
Anodized Aluminium Or Stainless Steel Mild Steel Sheet duly powder coated Two or Three Removable Shelves Integrated Integrated
5°C to 60°C ± 0.5°C
Air Circulation Fan
Manual Magnetic Gasket Door Acrylic Sheet for Inspection

Bio Safety Cabinet

Technical Specifications:
⚫ Cleanliness: Class 100
⚫ Control: Digital
⚫ Particle retention: 0.3 micron
Velocity:90FPM + 20%
Illumination :750-800 lumen
Noise level: 60-65 decibels
⚫ Standard : FED 209E
⚫ Power supply: 220v single phase
Nominal inflow velocity of 105 fpm (0.5 m/sec)
Nominal down flow velocity of 55 fpm (0.3 m/sec)
Approximately 70% air recirculation
Smart-Start System
Night-Smart System that idles the blower when the sash is fully closed Digital display of inflow air velocity
Fluorescent light or UV light control
Control on right-hand side post for manual activation of blower, light 304 grade stainless steel seamless interior
Epoxy-coated mild steel exterior
99.99% efficient HEPA filters
Fully-closing, clear 1/4″ Acrylic sash with two sash handles, Sash
counterbalanced, anti-racking mechanism and 10 degree slope
21.7″ (54 cm) maximum sash opening height and 27.0″ (69 cm) viewing height
Glare-free fluorescent lighting
10′ (3 m) power cord with plug

Cabinet For Desktop

INFRALAB presents Metal Black cabinet for desktop with Castor Wheel. This product is manufactured using quality assured material and advanced techniques, which make them up to the standard in this highly competitive sector. This product is Easy to Handle, Transport & Assemble.

Calorimeter for Laboratory

%T & Abs., Conc. and K-factor
1ml Sample volume
Display: 2 Line 16 Character LCD
Light source: White LED
Eight Optical filters on a turret to cover
100
Specification:
EDetector Hermetically Sealed Photodiode
Dimension W160xD200xH100 mm
Wavelength Range 400 nm to 700 nm with 8 optical filters Photometric Resolution 0.1%, T, 0.001 Abs upto 1.999 Abs (O.D) Display 2 Line 16 Character LCD
Concentration 0 to 2 times the absorbance
Sample Volume 1 ml in 4 ml Test Tube/Cuvette
Source White LED
Printer Port Epson Compatible 80 column D.M. Printer Power 230V +/-10%, 50Hz
Weight 1.5 Kg

CPU Trolley

INFRALAB presents Metal Black CPU Trolley with Castor Wheel. This product is manufactured using quality assured material and advanced techniques, which make them up to the standard in this highly competitive sector. This product is Easy to Handle, Transport & Assemble.

CPU Trolley/CPU Stand

INFRALAB presents Metal Black CPU Trolley with Castor Wheel. This product is manufactured using quality assured material and advanced techniques, which make them up to the standard in this highly competitive sector. This product is Easy to Handle, Transport & Assemble.

Fume Hood (FSSAI)

Fabricated out of thick wooden board. It designed so as to throw out all toxic/harmful vapors & fumes thus protecting costly Instruments and the persons working in the lab. Outer is fin- ished with sunmica and inner epoxy painted. Working table top is acid/alkali resistant and a small wash basin with connections provided for inlet and outlet of water. The Front door moves vertically up and down with concealed counter balanced weights. The unit is fitted with flours- cent light and a gas cock for gas/air supply. The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. To work On 220Volts A.C. 50Hz supply.
SPECIFICATIONS
Working Area Size

– 90 X 60 X 60 cm

– 120 X 60 X 60 cm

– 120 X 75 X 75 cm

Incubators (FSSAI)

Chamber Size (H X W X D) in mm/Inches Shelves
Capacity (Liters)
300 x 300 x 300 mm (12″x12″x12″) 2
28 Ltrs.
350 x 350 x 350 mm (14″x14″x14″) 2
45 Ltrs
400 x 400 x 400 mm (16″x16″x16″) 2

65 Ltrs
450 x 450 x 450 mm (18″x18″x18″) 2

95 Ltrs
600 x 450 x 450 mm (24″x18″x18″) 2

125 Ltrs
600 x 600 x 600 mm (24″x24″x24″) 2

224 Ltrs
900 x 600 x 450 mm (36″x24″x18″) 2

252 Ltrs
900 x 600 x 600 mm (36″x24″x24″) 2

336 Ltrs
900 x 900 x 900 mm (36″x36″x36″) 3

480 Ltrs
Fabrication: Double Wall Fabrication
Inner Chamber Material: Anodized Aluminium Or Stainless Steel

Exterior Wall: Mild Steel Sheet duly powder coated
Shelves: Two or Three Removable Shelves
Heating Elements: Nichrome Wire Heating Element

Heating Range: 30°C to 110°C ± 0.1°C

Air Circulation: Air Circulation Fan

Thermometer: L-Type Thermometer

Control Panel: Regulator Knob and Indicators
Power Supply: 220V A.C. 50 Hz Single Phase.

Laboratory Drying Oven

Laboratory Drying Oven is an industrial type Hot Air Oven, which is used to heat as well as zero down the moisture from the surface and the process carried out inside the equipment. Infralab manufactures Industrial Drying Oven (Model IHE02) in India and supplies these to clinical laboratories, research laboratories, pharmaceutical laboratories, and universities. Drying Oven Industrial Type is available on GEM – the government e-marketplace.

Body Specifications:
Fabrication: Double Wall Fabrication
Inner Chamber Material: Mild Steel Sheet duly powder coated
Exterior Wall: Mild Steel Sheet duly powder coated
Filling: Gaps are filled with high-grade glass wool
Air Circulation: Air Blowers are integrated into the equipment for a constant flow of hot air in order to maintain the uniform temperature inside the chamber,
Heating Elements: Nichrome Wire Heating Element on three sides of equipment for uniform heating – Heating Range: 50°C to 250°C ± 2°C controlled by hydraulic type capillary thermostat.
Thermometer: Dial-Type Thermometer – Control Panel: Regulator Knob and Indicators – Power Supply: 220V A.C. 50 Hz Single Phase.
Chamber size in mms/inches
a) 900 x 600 x 600 mm (36″ x 24″ x 24″ )
b) 1200 x 900 x 900 mm (48″ x 36″ x 36″)
c) 1500 x 900 x 900 mm (60″ x 36″ x 36″)
d) 1800 x 1200 x 900 mm (72″ x 48″ x 36″)

Laboratory Hot Plate

Laboratory hot plates are available in round and rectangular shapes. Body is fabricated out of thick mild steel sheet duly finished in stoving enamel paint. The hot plate made of cast iron, nicely & Precisely machined & smoothed duly finished in heat resistant black paint is firmly mounted on the body. Heavy duty heating elements are securely layed under the plate to operate on 220 V AC 50 Hz single phase. is controlled by a three-heat rotary switch along with an indicator lamp for the mains and cord & plug.

–

HOT PLATE : (ROUND) Single: Specifications as above with 20 cm.(8”) dia. Moulded top.
HOT PLATE (Round) Double: As above but with two plates of 20 cm (8”) dia. having independent pilot lamps & switches
HOT PLATE (Rectangular): Specifications as above but plate is rectangular in shape.

Laboratory Incubators

Chamber Size (H X W X D) in mm/Inches Shelves
Capacity (Liters)
300 x 300 x 300 mm (12″x12″x12″) 2
28 Ltrs.
350 x 350 x 350 mm (14″x14″x14″) 2
45 Ltrs
400 x 400 x 400 mm (16″x16″x16″) 2

65 Ltrs
450 x 450 x 450 mm (18″x18″x18″) 2

95 Ltrs
600 x 450 x 450 mm (24″x18″x18″) 2

125 Ltrs
600 x 600 x 600 mm (24″x24″x24″) 2

224 Ltrs
900 x 600 x 450 mm (36″x24″x18″) 2

252 Ltrs
900 x 600 x 600 mm (36″x24″x24″) 2

336 Ltrs
900 x 900 x 900 mm (36″x36″x36″) 3

480 Ltrs
Fabrication: Double Wall Fabrication
Inner Chamber Material: Anodized Aluminium Or Stainless Steel

Exterior Wall: Mild Steel Sheet duly powder coated
Shelves: Two or Three Removable Shelves
Heating Elements: Nichrome Wire Heating Element

Heating Range: 30°C to 110°C ± 0.1°C

Air Circulation: Air Circulation Fan

Thermometer: L-Type Thermometer

Control Panel: Regulator Knob and Indicators
Power Supply: 220V A.C. 50 Hz Single Phase.

Laminar Air Flow Cabinets or stations

Filtration:
Three Stage Filtration Process to supply clean air in the chamber.
– Pre Filter
– HEPA Filter
– UV. Germicidal Tube
Body Specification:
Material: Ply Board (18mm thick) in Melamine Lamination Finish or Mild Steel Duly Powder Coated or Stainless Steel.
Work Bench: Stainless Steel Work Bench enclosed in a transparent acrylic sheet.
Working Chamber Size:
IHE68-A: 2 X 2 X 2 (feet)

IHE68-B: 3 X 2 X 2 (feet)

IHE68-C: 4X2 X2 (feet)

IHE68-D: 6X 2 X 2 (feet)

Non Refrigerated Centrifuge for General Purpose and Research

– Bench Type

– 5200RPM Fast Spin
– Self balancing Motor
– Calibration Window on Lid

– Noise Free & Vibration Free
CRC Sheet duly Powder Coated Metallic Centrifuge Bowl Digital Timer
Lock & Dynamic Brake Imbalance Detector
LCD Display
SPECIFICATIONS
Acceleration & Deceleration Modes Microprocessor Based
Double Walled ABS Injection Molded Lid

Digital Temperature Controller & Indicator

Complete with Chord & Plug

Last Test Parameter Recall
Max. Speed 5200 RPM 3600xg
Max. RCF 3600xg
Max. Cap. 400ml
Motor Universal Motor with Carbon Brushes
Power AC 220V 50 Hz ±10%
Weight 21kg. approx.
Dimension 415mm *360mm*305mm

Refrigerated Centrifuge (FSSAI)

– Bench Type
– 16000 RPM – Ultra Speed – Self balancing Motor
– Kirloskar Compressor
– Noise Free & Vibration Free
CRC Sheet duly Powder Coated

Stainless Steel Centrifugal Bowl

LCD Display

Digital Timer
Lock & Dynamic Brake

Imbalance Detector
Acceleration & Deceleration Modes

Microprocessor Based
Speed Regulator
Digital Temperature Controller & Indicator
Complete with Chord & Plug
Max. Speed : 20000 RPM
Max. RCF : 27800xg
Timer : 0-99 min
Motor : Brushless Motor
Temp. Range: Room temperature- to Minus 8°C
Temp. Accuracy : ±2°C
Power : AC 220V 50 Hz 20A
Weight : 60 kg. approx.

Dimension : L-27″ x W-21″ x H-15″ approx.

Refrigerated Centrifuge For General And Research Purpose