-
Analytical Weight Box
Analytical Weight Box
-
Apron Locker Cabinet
Fabricated from plates of prime quality tested steel Locks protected by a solid steel door, with no part protruding out State-of-the-art twelve-tank anti-corrosion treatment for all […]
-
Aspirator Bottle
Aspirator Bottle
-
Atomic Absorption Spectrophotometer (IFS320)
Atomic Absorption Spectrophotometer (IFS320)
-
Atomic Absorption Spectrophotometer (IFS530)
Atomic Absorption Spectrophotometer (IFS530)
-
Audio Frequency Function Generator
Audio Frequency Function Generator
-
Auditorium Chair
INFRALAB Total Height: 1050mm, Seat Height: 460mm, Depth: 750mm (Normal), After pushing back: 925mm, Width: 560mm.
Push Back reclining / Axed Backrest with auto tip-up cushion.
Seat sizes available from 21″ to 24″.
PPCP injection moulded housing for cushion and back cover.
Cushion housing with acoustical perforation. Moulded flame resistant & CFC free PU foam.
Integral skin moulded armrest with cup-holder, duly injection moulded OR fabric upholstered PU form insert at hand resting portion OR PU waterfall armrest.
Enough thigh and backrest support with wider seating area.
All exposed sheet metal parts are powder coated. All fasteners are zinc coated. Usage of anchor fasteners with high bonding grouting material.
Seat serial numbering on chair cushion. Chair structure is made in combination of ERW pipe & sheet metal.
Back/cushion is made up of polyurethane foam (P.U.) with density of 50±5 kg/m.
-
Auditorium Chair (V2)
INFRALAB Total Height: 1050mm, Seat Height: 460mm, Depth: 750mm (Normal), After pushing back: 925mm, Width: 560mm.
Push Back reclining / Axed Backrest with auto tip-up cushion.
Seat sizes available from 21″ to 24″.
PPCP injection moulded housing for cushion and back cover.
Cushion housing with acoustical perforation. Moulded flame resistant & CFC free PU foam.
Integral skin moulded armrest with cup-holder, duly injection moulded OR fabric upholstered PU form insert at hand resting portion OR PU waterfall armrest.
Enough thigh and backrest support with wider seating area.
All exposed sheet metal parts are powder coated. All fasteners are zinc coated. Usage of anchor fasteners with high bonding grouting material.
Seat serial numbering on chair cushion. Chair structure is made in combination of ERW pipe & sheet metal.
Back/cushion is made up of polyurethane foam (P.U.) with density of 50±5 kg/m.
-
Auto Karl Fischer Titrimeter
Auto Karl Fischer Titrimeter – Model IAC-140
-
Autoclave (ICMR Specs)
Product Highlights:
- Body: High Grade Stainless Steel (Inner Chamber, Outer Chamber, Heat Cover, Carrier)
- Locking System: Radial Locking Arrangement
- Pressure Guage
- Manual Exhaust Valve
- Water Level Indicator
- Double Safety Valve
- Vacuum Breaker
- Drain Valve
- Jointless Rubber Gasket
- Control Panel
Chamber Size (Dia X Depth) Load Capacity
250 x 450mm 2KW 22 Ltrs.
300 x 500mm 3KW 40 Ltrs.
350 x 550mm 4KW 50 Ltrs.
400 x 600mm 5KW 78 Ltrs.
-
Autoclave Horizontal
Capacity :138 L
Power Consumption : 9 kW
Type : Horizontal
Working Pressure : 40 PSI
Depth : 1100 mm
Inner Diameter : 400 mm
Material : Stainless Steel -
B.O.D Incubator
B.O. D Incubator (Bio-Chemical Oxygen Demand Incubator) Model IHE09 is used for incubation wherein a constant temperature is required. This Histopathology equipment provides both cooling and […]
-
B.O.D. Incubators
Inner Chambers (W X D X H) mm Capacity cu.ft. Capacity (Litre)
455 x 410 x 610mm 4 cu.ft. 112 L
505 x 415 x 830 mm 6.1 cu.ft. 171 Ltrs
565 x 565 x 865 mm 10 cu.ft. 280 Ltrs
650 x 580 x 900 mm 12 cu.ft. 336 Ltrs
700 x 650 x 900 mm 15 cu.ft.
Fabrication:
Inner Chamber Material:
Exterior Wall:
Shelves:
Cooling Unit:
Heating Unit:
Temperature Range: Air Circulation: Locking System: Inspection:
Double Wall Fabrication
Anodized Aluminium Or Stainless Steel Mild Steel Sheet duly powder coated Two or Three Removable Shelves Integrated Integrated
5°C to 60°C ± 0.5°C
Air Circulation Fan
Manual Magnetic Gasket Door Acrylic Sheet for Inspection -
Bacteriological Incubator
Bacteriological Incubator Model IHE07 is used to maintain optimal humidity, temperature, carbon dioxide and oxygen in the chamber to culture bacteria and eukaryotic cells. This Histopathology […]
-
Bar & Gauge
Bar & Gauge
